How to Flash Nokia Symbian and S40 Phones

                                     
This Tutorial will take you through how you can format your Nokia Phones be it symbian or java with Phoenix service software using your original nokia usb cable. Flashing  Nokia PHONES may affect your language depending on the firmware you downloaded e.g if your default firmware is europe english and you download that of asia, you may see changes in Language change- or product code change.

Warning:

Be prepared to do this at your own risk…. However nobody will follow my tutorial and have any problem.The reason is this topic has been tested and it is trusted i have flashed my nokia n95, E5 and nokia n8 severally with phoenix without any problem

REQUIRED SOFTWARES:

Download Navifirm below:

navifirm_V 0.3_supplied by lemmy28_to_download_ur_nokia_fimwares

Download  phoenix below:

http://www.mediafire.com/?tun3006leaa3rwt

After downloading all the required tools above you can now read on to complete the following process in other to flash your phone

Now The Procedures:
1. First remove the cable from the phone and make sure it is turned off. If it is necessary, remove and insert battery.

2. Run Phoenix Service Software as administrator. (Windows Vista, 7: right click -> run as administrator; XP: login with administrator privileges). Select “NO CONNECTION” as your connection type

3. Select “Open Product” option in “File” menu.

4. A window will pop-up, select the mobile phone you want to flash. The product code of the mobile phone is on the sticker under the battery. (Usually RM-xxx)

5.  Now Select “Firmware Update” option in “Flashing” menu.

6. Press “…” button on the top-right corner of the window to select the language pack / product code You want to flash on phone.

7. Now select the product code / language pack You want to flash on phone, and press OK button.

8. Tick Dead phone USB flashing.

9. Press “Update Software” to start the firmware update procedure.

10. Follow the instructions: (if that method doesn’t work, press OK, then press power on button on phone and right after connect the usb cable)

11. Phone firmware update process should start.

12. When the update process finished, a window will appear: “Firmware updating succeded.”

13. You Can now remove your phone from cable, and try to turn it on. It may happen that the phone doesn’t turn on. Hardware error, firmware downgrade or bad certificate could cause that problem.
If you encountered any problem in the course of your flashing the phone, please drop your comment here and i will help you in solving same.